ZyXEL Communications GS2200-24P Series, User Manual, Page: 321 / 360

Chapter 36 MAC Table
GS2200-24/24P User’s Guide
321
The following table describes the labels in this screen.
Table 109 Management > MAC Table
LABEL DESCRIPTION
Condition Select one of the buttons and click Search to only display the data which
matches the criteria you specified.
Select All to display any entry in the MAC table of the Switch.
Select Static to display the MAC entries manually configured on the
Switch.
Select MAC and enter a MAC address in the field provided to display a
specified MAC entry.
Select VID and enter a VLAN ID in the field provided to display the MAC
entries belonging to the specified VLAN.
Select Port and enter a port number in the field provided to display the
MAC addresses which are forwarded on the specified port.
Sort by Define how the Switch displays and arranges the data in the summary
table below.
Select MAC to display and arrange the data according to MAC address.
Select VID to display and arrange the data according to VLAN group.
Select PORT to display and arrange the data according to port number.
Transfer
Type Select Dynamic to MAC forwarding and click the Transfer button to
change all dynamically learned MAC address entries in the summary table
below into static entries. They also display in the Static MAC Forwarding
screen.
Select Dynamic to MAC filtering and click the Transfer button to
change all dynamically learned MAC address entries in the summary table
below into MAC filtering entries. These entries will then display only in the
Filtering screen and the default filtering action is Discard source.
Cancel Click Cancel to change the fields back to their last saved values.
Index This is the incoming frame index number.
MAC Address This is the MAC address of the device from which this incoming frame
came.
VID This is the VLAN group to which this frame belongs.
Port This is the port where the above MAC address is forwarded.
Type This shows whether the MAC address is dynamic (learned by the Switch)
or static (manually entered in the Static MAC Forwarding screen).