ZyXEL Communications GS2200-24P Series, User Manual, Page: 283 / 360

GS2200-24/24P User’s Guide
283
C
H A P T E R
3 2
Access Control
32.1 Overview
This chapter describes how to control access to the Switch.
A console port and FTP are allowed one session each, Telnet and SSH share nine
sessions, up to five Web sessions (five different user names and passwords) and/
or limitless SNMP access control sessions are allowed.
A console port access control session and Telnet access control session cannot
coexist when multi-login is disabled. See the CLI Reference Guide for more
information on disabling multi-login.
32.1.1 What You Can Do
• Use the Access Control screen ( Section 32.2 on page 284 ) to display the main
screen.
• Use the SNMP screen ( Section 32.3 on page 284 ) to configure your SNMP
settings.
• Use the Trap Group screen ( Section 32.4 on page 287 ) to specify the types of
SNMP traps that should be sent to each SNMP manager.
• Use the Logins screens ( Section 32.5 on page 288 ) to assign which users can
access the Switch via web configurator at any one time.
• Use the Service Access Control screen ( Section 32.6 on page 289 ) to decide
what services you may use to access the Switch.
• Use the Remote Management screen ( Section 32.7 on page 290 ) to specify a
group of one or more “trusted computers” from which an administrator may use
a service to manage the Switch.
Table 89 Access Control Overview
Console Port SSH Telnet FTP Web SNMP
One session Share up to nine
sessions One session Up to five
accounts No limit