manualshive.com logo in svg

ZyXEL Communications GS1915 Series, User Manual

Share
Download
ZyXEL Communications GS1915 Series User Manual Download Page 254

Chapter 31 Maintenance

GS1915 Series User’s Guide

254

31.6.1  Tech-Support Download

When you click 

Download

 to save your current Switch configuration to a computer, the following screen 

appears. When the log report has downloaded successfully, click 

Back

 to return to the previous screen.

Figure 183   

Management > Maintenance > Tech-Support: Download

31.7  Certificates

The Switch can use HTTPS certificates that are verified by a third party to create secure HTTPS 
connections between your computer and the Switch. This way, you may securely access the Switch 
using the Web Configurator. See 

Section 32.8.3 on page 275

 for more information about HTTPS.

Certificates are based on public-private key pairs. A certificate contains the certificate owner’s identity 
and public key. Certificates provide a way to exchange public keys for use in authentication.

Click 

Management

 > 

Maintenance

 > 

Certificates

 to open the following screen. Use this screen to import 

the Switch's CA-signed certificates.

Figure 184   

Management > Maintenance > Certificates

Mbuf

Click 

Download

 to see the Mbuf log report. The log includes Mbuf over threshold 

information. This log report is stored in flash memory.

ROM

Click 

Download

 to see the Read Only Memory (ROM) log report. This report is stored in 

flash memory.

Table 126   Management > Maintenance > Tech-Support (continued)

LABEL

DESCRIPTION

Summary of Contents for GS1915 Series



























































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands