ZyXEL Communications GS-2724 User Manual Download Page 89

Page: 89 / 348

Chapter 8 VLAN

GS-2724 User’s Guide

8.5.2 Static VLAN Details

Use this screen to view detailed port settings and status of the VLAN group. See

Section 8.1

on page 85

for more information on static VLAN. Click on an index number in the

VLAN

Status

screen to display VLAN details.

Figure 33

VLAN Detail

The following table describes the labels in this screen.

8.5.3 Configure a Static VLAN

Use this screen to configure and view 802.1Q VLAN parameters for the Switch. See

Section

8.1 on page 85

for more information on static VLAN. To configure a static VLAN, click

Static

VLAN

in the

VLAN Status

screen to display the screen as shown next.

Table 15

VLAN Detail

LABEL

DESCRIPTION

VLAN Status

Click this to go to the

VLAN

Status

screen.

VID

This is the VLAN identification number that was configured in the

Static

VLAN

screen.

Port Number

This column displays the ports that are participating in a VLAN. A tagged port is

marked as

, an untagged port is marked as

and ports not participating in a VLAN

are marked as “

–

“.

Elapsed Time

This field shows how long it has been since a normal VLAN was registered or a

static VLAN was set up.

Status

This field shows how this VLAN was added to the Switch.

dynamic

: using GVRP

static

: added as a permanent entry

other

: added in another way, such as via Multicast VLAN Registration (MVR).

Summary of Contents for GS-2724





























































































































































































































































































































































Search results

Summary of Contents for GS-2724

Reviews:

Related manuals for GS-2724

Brands by name

Popular brands

ZyXEL Communications GS-2724, User Manual

Search results

Summary of Contents for GS-2724

Reviews:

Related manuals for GS-2724

Brands by name

Popular brands