background image

GS-2724 User’s Guide

329

A

P P E N D I X

  

Common Services

The following table lists some commonly-used services and their associated protocols and port 
numbers. For a comprehensive list of port numbers, ICMP type/code numbers and services, 
visit the IANA (Internet Assigned Number Authority) web site. 

Name

: This is a short, descriptive name for the service. You can use this one or create a 

different one, if you like.

Protocol

: This is the type of IP protocol used by the service. If this is 

TCP/UDP

, then the 

service uses the same port number with TCP and UDP. If this is 

USER-DEFINED

, the 

Port(s

) is the IP protocol number, not the port number.

Port(s)

: This value depends on the 

Protocol

. Please refer to RFC 1700 for further 

information about port numbers.

• If the 

Protocol

 is 

TCP

UDP

, or 

TCP/UDP

, this is the IP port number.

• If the 

Protocol

 is 

USER

, this is the IP protocol number.

Description

: This is a brief explanation of the applications that use this service or the 

situations in which this service is used.

Table 114   

Commonly Used Services

NAME

PROTOCOL

PORT(S)

DESCRIPTION

AH 

(IPSEC_TUNNEL)

User-Defined

51

The IPSEC AH (Authentication Header) 

tunneling protocol uses this service.

AIM/New-ICQ

TCP

5190

AOL’s Internet Messenger service. It is also 

used as a listening port by ICQ.

AUTH

TCP

113

Authentication protocol used by some 

servers.

BGP

TCP

179

Border Gateway Protocol.

BOOTP_CLIENT

UDP

68

DHCP Client.

BOOTP_SERVER

UDP

67

DHCP Server.

CU-SEEME

TCP
UDP

7648
24032

A popular videoconferencing solution from 

White Pines Software.

DNS

TCP/UDP

53

Domain Name Server, a service that 

matches web names (for example 

www.zyxel.com

) to IP numbers.

ESP 

(IPSEC_TUNNEL)

User-Defined

50

The IPSEC ESP (Encapsulation Security 

Protocol) tunneling protocol uses this 

service.

FINGER

TCP

79

Finger is a UNIX or Internet related 

command that can be used to find out if a 

user is logged on.

Summary of Contents for GS-2724





























































































































































































































































































































































Reviews: