ZyXEL Communications G-470, User Manual

Page: 72 / 110

G-470 User’s Guide
72 Chapter 7 Management Screens
You can also press the RESET button on the rear panel to reset the factory defaults of your
device. Refer to Section 4.6.1 on page 49 for more information on the RESET button.
7.4 F/W Upload Screen
Find firmware at www.zyxel.com in a file that (usually) uses the system model name with a
.rmt extension, for example, "zyxel.rmt". The upload process uses HTTP (Hypertext Transfer
Protocol) and may take up to two minutes. After a successful upload, the system will reboot.
Click Management > F/W Upload to display the screen as shown. Follow the instructions in
this screen to upload firmware to your device.
Figure 40 Management: F/W Upload
The following table describes the labels in this screen.
Warning: Do not turn off the device while firmware upload is in progress!
The following screen appears. Click OK to countinue.
Wait until the countdown reaches zero before logging into the device again.
Table 17 Management: F/W Upload
LABEL DESCRIPTION
File Path Type in the location of the file you want to upload in this field or click Browse ... to
find it.
Browse... Click Browse... to find the .rmt file you want to upload. Remember that you must
decompress compressed (.zip) files before you can upload them.
Upload Click Upload to begin the upload process. This process may take up to two
minutes.