ZyXEL Communications G-220 v3, User Manual

Page: 64 / 125

ZyXEL G-220 v3 User’s Guide
64 Chapter 4 Wireless Station Mode Configuration
4.4.1 Adding a New Profile
Follow the steps below to add a new profile.
• Click Add in the Profile screen. An Add New Profile screen displays as shown next.
Click Next to continue.
Figure 36 Station Mode: Profile: Add a New Profile
The following table describes the labels in this screen.
Channel This field displays the channel number used by the profile.
Security This field shows whether data encryption is activated ( WEP (WEP or 802.1x),
WPA , WPA-PSK , WPA2 , WPA2-PSK ) or inactive ( DISABLE ).
Transmission Rate This field displays the transmission speed of the selected profile in megabits per
second (Mbps).
Table 11 Station Mode: Profile (continued)
LABEL DESCRIPTION
Table 12 Station Mode: Profile: Add a New Profile
LABEL DESCRIPTION
Add New Profile
Profile Name Enter a descriptive name in this field.
SSID Select an available wireless device in the Scan Info table and click Select , or enter
the SSID of the wireless device to which you want to associate in this field
manually. Otherwise, enter Any to have the G-220 v3 associate to any AP or roam
between any infrastructure wireless networks.