ZyXEL Communications G-220 v3, User Manual

Page: 56 / 125

ZyXEL G-220 v3 User’s Guide
56 Chapter 4 Wireless Station Mode Configuration
4.3.1.1 WEP Encryption
Figure 30 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
Table 6 Station Mode: Security Setting: WEP
LABEL DESCRIPTION
Security Settings
WEP Select 64 Bits , 128 Bits or 256 Bits to activate WEP encryption and then fill in the
related fields.
Encryption Type Select an authentication method. Choices are SHARED and OPEN .
Refer to Section 3.2.3.1.2 on page 39 for more information.
Pass Phrase Enter a passphrase of up to 63 case-sensitive printable characters. As you enter
the passphrase, the G-220 v3 automatically generates four different WEP keys
and displays it in the key field below. Refer to Section 3.2.3.1.1 on page 39 for
more information.
At the time of writing, you cannot use passphrase to generate 256-bit WEP keys.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field
below.