ZyXEL Communications G-210H, User Manual

Page: 36 / 79

ZyXEL G-210H User’s Guide
36 Chapter 4 Wireless Station Mode Configuration
4.3.1 Security Settings
When you configure the G-210H to connect to a network with wireless security activated and
the security settings are disabled on the G-210H, the screen varies according to the encryption
method used by the selected network.
4.3.1.1 WEP Encryption
Figure 18 Station Mode: Security Setting: WEP
The following table describes the labels in this screen.
Channel This field displays the channel number used by each wireless device.
Signal This field displays the signal strength of each wireless device.
Scan Click Scan to search for available wireless devices within transmission range.
Connect Click Connect to associate to the selected wireless device.
Add Click Add to create a new profile.
Network Type This field displays the network type ( Infrastructure or Ad Hoc ) of the wireless
device.
Channel This field displays the channel number used by each wireless device.
Security This field shows whether data encryption is activated ( WEP (WEP or 802.1x),
WPA , WPA-PSK , WPA2 , WPA2-PSK ) or inactive ( DISABLE ).
MAC address This field displays the MAC address of the wireless device.
Table 4 Station Mode: Site Survey (continued)
LABEL DESCRIPTION
Table 5 Station Mode: Security Setting: WEP
LABEL DESCRIPTION
Security Settings
Authentication Select an authentication method. Choices are AES or TKIP , please choose
according to the type selected on the Access Point.
Transmit Key Select a default WEP key to use for data encryption. The key displays in the field
below.