ZyXEL Communications G-210H, User Manual

Page: 34 / 79

ZyXEL G-210H User’s Guide
34 Chapter 4 Wireless Station Mode Configuration
4.2 The Link Info Screen
When the ZyXEL utility starts, the Link Info screen displays, showing the current
configuration and connection status of your G-210H.
Figure 16 Station Mode: Link Info
The following table describes the labels in this screen.
Table 3 Station Mode: Link Info
LABEL DESCRIPTION
Wireless Network
Status
Profile Name This is the name of the profile you are currently using.
Network Name
(SSID)
The SSID identifies the wireless network to which a wireless station is associated.
This field displays the name of the wireless device to which the G-210H is
associated.
AP MAC Address This field displays the MAC address of the AP or peer computer to which the G-
210H is associated.
Network Type This field displays the network type ( Infrastructure or Ad-Hoc ) of the wireless
network.
Channel This field displays the radio channel the G-210H is currently using.
Link Speed This field displays the current maximum connection speed in Megabits per second
(Mbps).
Throughput This field displays the current data transmission rates in kilobits per second (Kbps).
Total Transmit This field displays the total number of data frames transmitted.
Total Receive This field displays the total number of data frames received.
Signal Strength The status bar shows the strength of the signal. The signal strength mainly
depends on the antenna output power and the distance between your G-210H and
the AP or peer computer.