ZyXEL Communications EX3510-B1, User Manual

Page: 94 / 313

Chapter 7 Wireless
EX3510-B1 User’s Guide
94
7.3 Guest/More AP
This screen allows you to configure a guest wireless network that allows access to the Internet only
through the Zyxel Device. You can also configure additional wireless networks, each with different
security settings, in this screen.
Click Network Setting > Wireless > Guest/More AP . The following screen displays.
The following table introduces the supported wireless networks.
Figure 54 Network Setting > Wireless > Guest/More AP
The following table describes the labels in this screen.
7.3.1 Edit Guest/More AP Settings
Use this screen to create Guest and additional wireless networks with different security settings.
Table 22 Supported Wireless Networks
WIRELESS NETWORKS WHERE TO CONFIGURE
Main/1 Network Setting > Wireless > General screen
Guest/3 Network Setting > Wireless > Guest/More AP screen
Table 23 Network Setting > Wireless > Guest/More AP
LABEL DESCRIPTION
# This is the index number of the entry.
Status This field indicates whether this SSID is active. A yellow bulb signifies that this SSID is active, while a
gray bulb signifies that this SSID is not active.
SSID An SSID profile is the set of parameters relating to one of the Zyxel Device’s BSSs. The SSID (Service
Set IDentifier) identifies the Service Set with which a wireless device is associated.
This field displays the name of the wireless profile on the network. When a wireless client scans for
an AP to associate with, this is the name that is broadcast and seen in the wireless client utility.
Security This field indicates the security mode of the SSID profile.
Guest WLAN This displays if the guest WiFi function has been enabled for this wireless LAN.
If Home Guest displays, clients can connect to each other directly.
If External Guest displays, clients are blocked from connecting to each other directly.
N/A displays if guest wireless LAN is disabled.
Modify Click the Edit icon to configure the SSID profile.