manualshive.com logo in svg

ZyXEL Communications EX3510-B1, User Manual

Share
Download
ZyXEL Communications EX3510-B1 User Manual Download Page 192

Chapter 14 VLAN Group

EX3510-B1 User’s Guide

192

14.2  VLAN Group Settings

This screen shows the VLAN groups created on the Zyxel Device. Click 

Network Setting > VLAN Group

 to 

open the following screen.

Figure 117   

Network Setting > VLAN Group

The following table describes the fields in this screen.

14.2.1  Add/Edit a VLAN Group

Click the 

Add New VLAN Group

 button in the

 VLAN Group

 screen to open the following screen. Use this 

screen to create a new VLAN group.

Figure 118   

Add/Edit VLAN Group

Table 73   Network Setting > VLAN Group

LABEL

DESCRIPTION

Add New VLAN 
Group

Click this button to create a new VLAN group.

#

This is the index number of the VLAN group.

Group Name

This shows the descriptive name of the VLAN group.

VLAN ID

This shows the unique ID number that identifies the VLAN group.

Interface

This shows the LAN ports included in the VLAN group and if traffic leaving the port will be tagged 
with the VLAN ID.

Modify

Click the 

Edit

 icon to change an existing VLAN group setting or click the 

Delete 

icon to remove 

the VLAN group.

Summary of Contents for EX3510-B1


























































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands