ZyXEL Communications EX3510-B1, User Manual

Page: 133 / 313

Chapter 8 Home Networking
EX3510-B1 User’s Guide
133
8.6 STB Vendor ID
Use this screen to configure the Vendor IDs of connected Set Top Boxes (STBs) so the Zyxel Device can
automatically create static DHCP entries for them when they request IP addresses.
Click Network Setting > Home Networking > STB Vendor ID to open this screen.
Figure 76 Network Setting > Home Networking > STB Vendor ID
The following table describes the labels in this screen.
8.7 Wake on LAN
Wake on LAN (WoL) allows you to remotely turn on a device on the network, such as a computer,
storage device or media server. To use this feature the remote hardware (for example the network
adapter on a computer) must support Wake on LAN using the ‘Magic Packet’ method.
Offer Public IP
by DHCP Click this switch to enable or disable the Zyxel Device to provide public IP addresses by DHCP
server. When the switch goes to the right
, the function is enabled. Otherwise, it is not.
Enable ARP
Proxy Click this switch to enable or disable the ARP (Address Resolution Protocol) proxy. When the
switch goes to the right
, the function is enabled. Otherwise, it is not.
Cancel Click Cancel to restore the default or previously saved settings.
Apply Click Apply to save your changes.
Table 35 Network Setting > Home Networking > Additional Subnet (continued)
LABEL DESCRIPTION
Table 36 Network Setting > Home Networking > STB Vendor ID
LABEL DESCRIPTION
Vendor ID 1~5 These are STB’s Vendor Class Identifiers (DHCP option 60). A Vendor Class Identifier is usually
used to inform the DHCP server a DHCP client’s vendor and functionality.
Cancel Click Cancel to restore the default or previously saved settings.
Apply Click Apply to save your changes.