ZyXEL Communications ES-315, User Manual

Page: 58 / 166

Chapter 7 VLAN
ES-315/ES-315-F User’s Guide
58
7.2 Static VLAN
Use a static VLAN to decide whether an incoming frame on a port should be
• sent to a VLAN group as normal depending on its VLAN tag.
• sent to a group whether it has a VLAN tag or not.
• blocked from a VLAN group regardless of its VLAN tag.
You can also tag all outgoing frames (that were previously untagged) from a port with the
specified VID.
7.2.1 Static VLAN Status
See Section 7.1 on page 57 for more information on Static VLAN. Click Advanced
Application > VLAN from the navigation panel to display the VLAN Status screen as shown
next.
Figure 22 Advanced Application > VLAN: VLAN Status
The following table describes the labels in this screen.
7.2.2 Static VLAN Details
Use this screen to view detailed port settings and status of the VLAN group. See Section 7.1
on page 57 for more information on static VLAN. Click on an index number in the VLAN
Status screen to display VLAN details.
Table 12 Advanced Application > VLAN: VLAN Status
LABEL DESCRIPTION
The Number of
VLAN
This is the number of VLANs configured on the Switch.
Index This is the VLAN index number. Click on an index number to view more VLAN
details.
VID This is the VLAN identification number that was configured in the Static VLAN
screen.
Elapsed Time This field shows how long it has been since a normal VLAN was registered or a
static VLAN was set up.
Status This field shows how this VLAN was added to the Switch; static - added as a
permanent entry or other - added in another way such as via Multicast VLAN
Registration (MVR).
Change Pages Click Previous or Next to show the previous/next screen if all status information
cannot be seen in one screen.