ZyXEL Communications ES-2024 Series, User Manual, Page: 93 / 282

Chapter 9 VLAN
ES-2024 Series User’s Guide
93
9.5.4 Configure VLAN Port Settings
Use the VLAN Port Setting screen to configure the static VLAN (IEEE 802.1Q) settings on a
port. See
Section 9.1 on page 87 for more information on static VLAN. Click the VLAN Port
Setting link in the VLAN Status screen.
Figure 45 Advanced Application > VLAN > VLAN Port Settings
The following table describes the labels in this screen.
Cancel Click Cancel to begin configuring this screen afresh.
Clear Click Clear to start configuring the screen again.
VID This field displays the ID number of the VLAN group. Click the number to edit the
VLAN settings.
Active This field indicates whether the VLAN settings are enabled ( Yes ) or disabled ( No ).
Name This field displays the descriptive name for this VLAN group.
Delete Click Delete to remove the selected entry from the summary table.
Cancel Click Cancel to clear the Delete check boxes.
Table 17 Advanced Application > VLAN > Static VLAN (continued)
LABEL DESCRIPTION
Table 18 Advanced Application > VLAN > VLAN Port Setting
LABEL DESCRIPTION
GVRP GVRP (GARP VLAN Registration Protocol) is a registration protocol that defines a
way for switches to register necessary VLAN members on ports across the
network.
Select this check box to permit VLAN groups beyond the local Switch.
Ingress Check Select this check box to activate ingress filtering on the Switch.
Clear this check box to disable ingress filtering the Switch.
Port This field displays the port number.