ZyXEL Communications ES-2024 Series, User Manual, Page: 69 / 282

Chapter 7 System Status and Port Statistics
ES-2024 Series User’s Guide
69
Figure 31 Status: Port Details
The following table describes the labels in this screen.
LABEL DESCRIPTION
Port Info
Port NO. This field displays the port number you are viewing.
Name This field displays the name of the port.
Link This field displays the speed (either 10M for 10Mbps, 100M for 100Mbps or 1000M for
1000Mbps) and the duplex ( F for full duplex or H for half duplex). It also shows the
cable type ( Copper or Fiber ).
Status If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port
(see Section 13.1.3 on page 109 for more information).
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
LACP This field shows if LACP is enabled on this port or not.
TxPkts This field shows the number of transmitted frames on this port
RxPkts This field shows the number of received frames on this port
Errors This field shows the number of received errors on this port.
Tx KB/s This field shows the number kilobytes per second transmitted on this port.
Rx KB/s This field shows the number of kilobytes per second received on this port.
Up Time This field shows the total amount of time the connection has been up.