manualshive.com logo in svg

ZyXEL Communications ES-2024 Series, User Manual, Page: 233 / 282

Share
Download
ZyXEL Communications ES-2024 Series User Manual Download Page 233

ES-2024 Series User’s Guide

233

C

H A P T E R

 

 32 

Cluster Management

This chapter introduces cluster management.

32.1  Clustering Management Status Overview 

Cluster Management allows you to manage switches through one switch, called the cluster 
manager. The switches must be directly connected and be in the same VLAN group so as to be 
able to communicate with one another.   

In the following example, switch 

A

 in the basement is the cluster manager and the other 

switches on the upper floors of the building are cluster members. 

Table 93   

ZyXEL Clustering Management Specifications

Maximum number of cluster 

members

24

Cluster Member Models 

Must be compatible with ZyXEL cluster management 

implementation.

Cluster Manager  

The switch through which you manage the cluster member 

switches.

Cluster Members  

The switches being managed by the cluster manager switch.

Summary of Contents for ES-2024 Series



























































































































































































































































































Reviews:

No comments