manualshive.com logo in svg

ZyXEL Communications ES-2024 Series, User Manual, Page: 195 / 282

Share
Download
ZyXEL Communications ES-2024 Series User Manual Download Page 195

ES-2024 Series User’s Guide

195

C

H A P T E R

 

 27 

DHCP

This chapter shows you how to configure the DHCP feature. 

27.1  DHCP Overview 

DHCP (Dynamic Host Configuration Protocol RFC 2131 and RFC 2132) allows individual 
computers to obtain TCP/IP configuration at start-up from a server. You can configure the 
Switch as a DHCP relay agent. If you configure the Switch as a relay agent, then the Switch 
forwards DHCP requests to DHCP server on your network. If you don’t configure the Switch 
as a DHCP relay agent then you must have a DHCP server in the broadcast domain of the 
client computers or else the client computers must be configured manually.

27.1.1  DHCP Modes 

If there is already a DHCP server on your network, then you can configure the Switch as a 
DHCP relay agent. When the Switch receives a request from a computer on your network, it 
contacts the DHCP server for the necessary IP information, and then relays the assigned 
information back to the computer. 

27.1.2  DHCP Configuration Options

The DHCP configuration on the Switch is divided into 

Global

 and 

VLAN

 screens. The screen 

you should use for configuration depends on the DHCP services you want to offer the DHCP 
clients on your network. Choose the configuration screen based on the following criteria:

•

Global

 - The Switch forwards all DHCP requests to the same DHCP server.

•

VLAN

 - The Switch is configured on a VLAN by VLAN basis. The Switch can be 

configured to relay DHCP requests to different DHCP servers for clients in different 
VLAN.

27.2  DHCP Status 

Click 

IP Application

 > 

DHCP

 in the navigation panel. The 

DHCP Status

 screen displays. 

Summary of Contents for ES-2024 Series



























































































































































































































































































Reviews:

No comments