ZyXEL Communications ES-2024 Series, User Manual, Page: 105 / 282

ES-2024 Series User’s Guide
105
C
H A P T E R
12
Filtering
This chapter discusses MAC address port filtering.
12.1 Configure a Filtering Rule
Filtering means sifting traffic going through the Switch based on the MAC addresses and
VLAN group (ID).
Click
Advanced Application > Filtering in the navigation panel to display the screen as
shown next.
Figure 53 Advanced Application > Filtering
The following table describes the related labels in this screen.
Table 22 Advanced Application > Filtering
LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Name Type a descriptive name (up to 32 English keyboard characters) for this rule. This is for
identification only.
MAC Type a MAC address in valid MAC address format, that is, six hexadecimal character
pairs.
VID Type the VLAN group identification number.
Add Click Add to save your changes to the Switch’s run-time memory. The Switch loses
these changes if it is turned off or loses power, so use the Save link on the top
navigation panel to save your changes to the non-volatile memory when you are done
configuring.