ZyXEL Communications ES-1552 - V1.12, User Manual

Page: 84 / 172

Chapter 13 Layer 2 (L2) Management
ES-1552 User’s Guide
84
13.1.1 Add a Static MAC Address Entry
Click Add in the L2 Address Management screen to display the configuration screen as
shown.
Figure 46 Add a Static MAC Entry
The following table describes the labels in this screen.
13.2 Viewing the L2 Address Table
Use the L2 Address Table screen to view entries in the MAC address table. Click L2
Address > Display in the navigation panel to display the screen as shown.
Port This field displays the port number of a manually entered MAC address entry.
Delete Click DELETE to remove this manually entered MAC address entry from the MAC
address table.
Table 25 L2 Management (continued)
LABEL DESCRIPTION
Table 26 Add a Static MAC Entry
LABEL DESCRIPTION
MAC Address Enter the MAC address in valid MAC address format, that is, six hexadecimal
character pairs.
Note: Static MAC addresses do not age out.
VID Enter the VLAN identification number.
Port Select the port where the traffic with the destination MAC address entered in the
MAC Address field will be automatically forwarded.
Add Address Click this to add this entry into the MAC address table.