ZyXEL Communications ES-1552 - V1.12, User Manual

Page: 130 / 172

Chapter 19 RMON-Lite
ES-1552 User’s Guide
130
The following table describes the labels in this screen.
19.6.1 RMON Event: Create New Event
Use the RMON Event: Create and the RMON Event: Modify screens to configure RMON
events. Click Create new Event in the RMON Event: Overview screen to view the screen as
shown.
You can also click an event index number in the
RMON Event: Overview screen to edit an
existing event configuration.
"
The RMON Event: Modify screen contains the same fields as the RMON
Event: Create screen shown as Figure 81 on page 131 .
Table 62 RMON Event: Overview
LABEL DESCRIPTION
RMON MIB
Table:
Use this drop down list box to select the MIB table you want to view. Click Apply to
refresh the screen to the selected MIB table view.
Refresh Click this to update all the fields in the RMON Event: Overview screen.
Create new
Event
Click this to configure new events on the switch.
Index This field displays an event index number. Click this number to edit the event entry.
Description This field displays a description of the event.
Type This field displays the event type ( 1:None , 2:Log , 3:SNMP-Trap , 4:Log-and-Trap ).
Community This field displays the community or SNMP trap.
Last Time Sent This field indicates the value of system up time on the switch when this event was
last generated. It appears in the following format “XXD: XXH: XXM: XXS”, where
“XX” stands for a number and “D” stands for days, “H” for hours, “M” for minutes and
“S” for seconds.
Owner This field displays the name of the creator of this entry.
Delete Click this to remove the selected event configuration.