ZyXEL Communications ES-1552 - V1.12 User Manual Download Page 116

Page: 116 / 172

Chapter 18 SNMP

ES-1552 User’s Guide

116

Figure 69

SNMP Trap Station

The following table describes the labels in this screen.

18.6.1 SNMP Trap Station: Create

Click on the

Create New Trap Station

link in the

SNMP Trap Station

screen to add an

SNMP Trap Station. The screen displays as shown.

Figure 70

SNMP Trap Station: Create

Table 51

SNMP Trap Station

LABEL

DESCRIPTION

Trap Station ID

Select the SNMP trap station you want to edit.

Create New

Trap Station

Click this to configure a new SNMP Trap Station.

Trap Station ID

This field indicates the trap station number. It is used for identification only. Click on

the individual trap station number to edit the trap station settings.

Remote IP

Address

This field displays the IP address of the remote SNMP management station.

Community

String

An SNMP community string is a text string that acts as a password. It is used to

authenticate messages that are sent between the management station (the SNMP

manager) and the device (the SNMP agent). The community string is included in

every packet that is transmitted between the SNMP manager and the SNMP agent.
This field displays the community string of this remote trap station.

Previous Page/

Use these navigation links to browse all of your SNMP groups.

Summary of Contents for ES-1552 - V1.12













































































































































































Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands

ZyXEL Communications ES-1552 - V1.12, User Manual

Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands