ZyXEL Communications ES-1552 - V1.12 User Manual Download Page 108

Page: 108 / 172

Chapter 18 SNMP

ES-1552 User’s Guide

108

Figure 59

SNMP Group

The following table describes the labels in this screen.

18.2.1 SNMP Group: Create

Use the

SNMP Group: Create

screen to add an SNMP group. Click on the

Create New

Group

link in the

SNMP Group

screen. The screen displays as shown.

Figure 60

SNMP Group: Create

Table 41

SNMP Group

LABEL

DESCRIPTION

Group ID

Select the SNMP group you want to edit.

Create New

Group

Click this to configure a new SNMP group.

Group ID

This field indicates the group identification number. It is used for identification only.

Click on the individual group number to edit the group settings.

Group Name

This field displays the name of the SNMP group.

SNMP Version

This field indicates which SNMP version this group uses to manage the switch.

Authentication

This field indicates whether authentication is required for members of this group.

Authentication can only be configured for SNMP v3.

Access

This field indicates the rights this group has for SNMP management. “R” indicates

that this group has read rights and “W” indicates ‘Write’ meaning that you can edit

the MIBs on the switch.

Previous Page/

Use these navigation links to browse all of your SNMP groups.

Summary of Contents for ES-1552 - V1.12













































































































































































Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands

ZyXEL Communications ES-1552 - V1.12, User Manual

Search results

Summary of Contents for ES-1552 - V1.12

Reviews:

Related manuals for ES-1552 - V1.12

Brands by name

Popular brands