manualshive.com logo in svg

ZyXEL Communications ES-1528 - V1.12, User Manual, Page: 125 / 170

Share
Download
ZyXEL Communications ES-1528 - V1.12 User Manual Download Page 125

 Chapter 19 RMON-Lite

ES-1528 User’s Guide

125

19.4.4  RMON History Statistics: Control  

Use the 

RMON History Statistics: Control 

screen to view the details of each polling sample 

collected for the history control index entries you configured. Click on an individual 

History 

Control Index

 entry in the 

RMON History Statistics: Overview

 screen to view the screen as 

shown.

Figure 77   

RMON History Statistics: Control

The following table describes the labels in this screen. 

Table 58   

RMON History Statistics: Control

LABEL

DESCRIPTION

RMON MIB 

Table:

Use this drop down list box to select the MIB table you want to view. Click 

Apply

 to 

refresh the screen to the selected MIB table view. 

Refresh

Click this to update all the fields in the 

RMON History Statistics : Control Index

 

screen.

Sample Index

This field displays the index number of the polling sample collected on the port.

Drop Events

This field displays the total number of packets that were dropped in this polling 

sample.

Octets

This field displays the total number of octets received in this polling sample.

Packets

This field displays the total number of all good packets received in this polling 

sample.

Broadcast 

Packets

This field displays the total number of good broadcast packets received in this polling 

sample.

Multicast 

Packets

This field displays the total number of good multicast packets received in this polling 

sample.

CRCAlign 

Errors 

This field displays the number of packets (between 64 ~ 1518 octets long) dropped in 

this polling sample because they either had bad Frame Check Sequence (FCS) or 

non-integral number of octets (alignment error). 

Undersize 

Packets

This field displays the number of packets (including bad packets) received in this 

polling sample that were between 0 and 64 octets in length.

Oversize 

Packets

This field displays the number of untagged packets (including bad packets) received 

in this polling sample that were greater than 1518 octets in length.

Fragments

This field displays the number of frames dropped in this polling sample because they 

were less than 64 octets long, and contained an invalid FCS, including non-integral 

and integral lengths.

Summary of Contents for ES-1528 - V1.12











































































































































































Reviews:

No comments