manualshive.com logo in svg

ZyXEL Communications ES-1528 - V1.12, User Manual, Page: 122 / 170

Share
Download
ZyXEL Communications ES-1528 - V1.12 User Manual Download Page 122

Chapter 19 RMON-Lite

ES-1528 User’s Guide

122

19.4  RMON-Lite History MIB

RMON-Lite History MIB configuration is divided into two parts: 

[2] History Control

 and 

[2] 

History Statistics

. 

• Use the 

[2] History Control

 screens to view and define the statistical sampling of data 

from activity in your network. Statistical sampling is controlled by defining the interface 
(port), polling period and the number of samples to be taken per polling period.

• Use the 

[2] History Statistics

 screens to view the results of statistical sampling on the 

ports.

19.4.1  RMON History Control : Overview 

Click 

RMON-Lite 

in the navigation panel and select 

[2] History Control

 to open the 

RMON 

History Control: Overview 

screen. Use this screen to view and configure RMON history 

configuration settings. 

Figure 74   

RMON History Control : Overview.

StatsPkts64Octets

This field displays the number of packets (including bad packets) 

received that were 64 octets in length.

StatsPkts65to127Octets

This field displays the number of packets (including bad packets) 

received that were between 65 and 127 octets in length.

StatsPkts128to255Octets

This field displays the number of packets (including bad packets) 

received that were between 128 and 255 octets in length.

StatsPkts256to511Octets

This field displays the number of packets (including bad packets) 

received that were between 256 and 511 octets in length.

StatsPkts512to1023Octets

This field displays the number of packets (including bad packets) 

received that were between 512 and 1023 octets in length.

StatsPkts1024to1518Octets

This field displays the number of untagged packets (including bad 

packets) received that were between 1024 and 1518 octets in length. 

This number also includes tagged packets received that were 1522 

octets in size. 

Table 54   

RMON Statistics : Port (continued)

LABEL

DESCRIPTION

Summary of Contents for ES-1528 - V1.12











































































































































































Reviews:

No comments