ZyXEL Communications ES-1528 - V1.12, User Manual, Page: 109 / 170

Chapter 18 SNMP
ES-1528 User’s Guide
109
18.2.2 SNMP Group - Modify
Click on the Group ID number or select a Group ID from the Group ID drop down list box
in the SNMP Group screen to modify the settings of an existing group.
Figure 61 SNMP Group - Modify
The following table describes the labels in this screen.
18.3 SNMP User
SNMP users are used to define the security parameters of SNMP clients in an SNMP v3
environment. Each SNMP user is a member of a predefined SNMP group. SNMP managers
must use the proper SNMP user and group credentials to gain access to and manage the switch.
Use the
SNMP User screen to create SNMP users and associate them to SNMP groups. Click
SNMP > User to view the screen as shown.
Table 42 SNMP Group - Modify
LABEL DESCRIPTION
Group ID This field indicates which group you are modifying.
Click on
Remove This Group to delete this group configuration from the switch.
Click on Display All Group to view the main SNMP Group screen.
Group Name Edit the name for this SNMP group.
SNMP Version Specify the SNMP version this group uses to manage the switch.
Authentication This field is only editable if you select SNMPv3 in the SNMP Version field. Select
Enabled to force SNMP v3 groups to authenticate with the switch or select Disabled
to deactivate authentication for the SNMP v3 groups. For SNMP v1 and SNMP v2c
authentication is always disabled.
Access Read - select Enabled to allow this group to collect information from this switch.
Write - select Enabled to allow this group to create or edit SNMP objects.
Apply Click this to save your settings to the switch.