ZyXEL Communications ENTERPRISE NETWORK CENTER, Manual

Page: 243 / 302

Chapter 9 Maintenance
ENC User’s Guide
247
The following table describes the fields in this screen.
9.4 Server
Use this screen to configure the ENC’s IP address or domain name, client login lockout, and mail
server settings. To open this screen, click Maintenance > Server.
Figure 188
Server
Table 118
User Account > Add/Edit
LABEL DESCRIPTION
General Settings
Account Type Select the type of the new user account.
Name Type up to 32 alphanumeric characters (0-9, a-z, A-Z), underscores (_) and/or
hyphens (-) for the name of this account. Spaces are not allowed.
Password Type up to 32 characters for the corresponding password of the user account.
Verify Password Type the same password again here to make sure that the one you typed
above was typed as intended.
Email Address Type a valid e-mail address for this user.
Description Type extra information about this user.
Map Access This section configures the Map(s) that are allowed the user to access.
Select Map(s) from the Available Maps field and click >> to move them to
the Allowed Map Access field. You can select Map(s) in the Allowed Map
Access field and click << to remove them from the list.
Cancel Click this to go back to the previous screen without saving any changes.
Ok Click this to save your settings and close this screen.