ZyXEL Communications ENTERPRISE NETWORK CENTER, Manual

Page: 168 / 302

Chapter 6 Tool
ENC User’s Guide
168
6.10 Schedule Report Add/Edit
Click Add or Edit in the Tool > Performance Monitoring > Schedule Report screen to
configure a scheduled report. You can check whether the schedule report is successfully generated
or not later in the Maintenance > Log screen.
Figure 121
Tool > Performance Monitoring > Schedule Report > Add/Edit
Each field is described in the following table.
Table 72
Tool > Performance Monitoring > Schedule Report > Add/Edit
LABEL DESCRIPTION
Name Enter the name of the schedule report. Only numbers (0-9), letters (a-z, A-Z),
hyphen (-) and the underscore (_) are allowed. Spaces are not allowed.
Type Select how often (daily, weekly or monthly) to generate the schedule
report.
Send Time Select when to start generating the report. The ENC sends the report after it
finishes generating it. The report generation time depends on the amount of
information in the report. Having the ENC generate too many reports at the
same time can affect performance. It is recommended that you vary the times
for your reports.
For a daily report, select the time (hour:minute) to generate the report.
For a weekly report, select which week day (Sunday~Saturday) and time
(hour:minute) to generate the report.
For a weekly report, select which date (1~31) and time (hour:minute) per
month to generate the report.
Receiver Email
Address List Enter a valid e-mail address to which the ENC sends the report and click Add
to add it in the list below. You can enter as many valid e-mail addresses as you
want. Select one or multiple entries and click Remove to delete them from
the list.The ENC provides an auto-complete feature in this field. As you type,
you can see a list of values for this field in other scheduled reports next to the
mouse. You can click on one to avoid typing the rest of the value.