EMG6765-Q10A User’s Guide
121
C
HAPTER
15
Static Route
15.1 Overview
This chapter shows you how to configure static routes for your EMG6765-Q10A.
The EMG6765-Q10A usually uses the default gateway to route outbound traffic from computers on the
LAN to the Internet. To have the EMG6765-Q10A send data to devices not reachable through the
default gateway, use static routes.
For example, the next figure shows a computer (
A
) connected to the EMG6765-Q10A’s LAN interface.
The EMG6765-Q10A routes most traffic from
A
to the Internet through the EMG6765-Q10A’s default
gateway (
R1
). You create one static route to connect to services offered by your ISP behind router
R2
.
You create another static route to communicate with a separate network behind a router
R3
connected to the LAN.
Figure 67
Example of Static Routing Topology
15.2 IP Static Route Screen
Click
Network > Static Route
to open the
Static Route
screen.
