EMG6726/8726-B10A User’s Guide
252
C
H A P T E R
30
Remote Management
30.1 Overview
Remote management controls through which interface(s), which services can access the EMG.
Note: The EMG is managed using the Web Configurator.
30.2 The MGMT Services Screen
Use this screen to configure through which interface(s), which services can access the EMG. You can
also specify the port numbers the services must use to connect to the EMG. Click
Maintenance >
Remote Management > MGMT Services
to open the following screen.
Figure 165
Maintenance > Remote Management > MGMT Services
The following table describes the fields in this screen.
Table 119 Maintenance > Remote Management > MGMT Services
LABEL
DESCRIPTION
WAN Interface
used for services
Select
Any_WAN
to have the EMG automatically activate the remote management service
when any WAN connection is up.
Select
Multi_WAN
and then select one or more WAN connections to have the EMG activate the
remote management service when the selected WAN connections are up.
service
This is the service you may use to access the EMG.
LAN/WLAN
Select the
Enable
check box for the corresponding services that you want to allow access to the
EMG from the LAN/WLAN.