ZyXEL Communications EMG3425-Q10A, User Manual

Page: 184 / 250

Chapter 25 Maintenance
EMG3425-Q10A User’s Guide
184
Figure 114
Access Point Mode
25.10 Sys OP Mode Screen
Use this screen to select how you want to use your EMG3425-Q10A.
Note: If you select the incorrect System Operation Mode you may not be able to connect
to the Internet.
Figure 115
Maintenance > Sys OP Mode
The following table describes the labels in the Sys OP Mode screen.
Table 79
Maintenance > Sys OP Mode
LABEL DESCRIPTION
Configuration Mode
Router Mode Select Router Mode if your device routes traffic between a local network and another
network such as the Internet. This mode offers services such as a firewall or bandwidth
management.
You can configure the IP address settings on your WAN port. Contact your ISP or system
administrator for more information on appropriate settings.