ZyXEL Communications DMA-1000 Series, User Manual

Page: 62 / 192

Chapter 9 Configuring the DMA
DMA-1000 Series User’s Guide
62
The following table describes the fields in this menu.
9.10 Audio Settings
"
The DMA only provides 2 channel (stereo) output. When the DMA plays 5.1
channel files, it downmixes the analog or digital input and provides 2 channel
(stereo) analog or digital output.
Use this menu to configure the DMA’s audio output for music playback. You can turn the S/
PDIF connector’s output (the DMA’s digital output) on or off for individual audio formats.
The analog output is always on. You can also select how much volume smoothing you want
during audio file playback.
See Section 9.10.1 on page 64 for details on the individual audio formats.
Select OPTION > Audio Output Settings to open the following menu.
Table 16 OPTION > TV Settings
LABEL DESCRIPTION
Output Type Select Digital if your television accepts digital input.
Select Analog if your television only accepts analog input.
Screen Size Select 16:9 if your television supports the 16:9 format (widescreen).
Select 4:3 if your television supports the 4:3 format (traditional television).
Resolution Select a video mode. Use the highest number that your television supports.
Select from
480i , 480p , 720p and 1080i .
You can also select Auto when the Output Type is set to Digital .
OK Select this to save your changes back to the DMA.
CANCEL Select this to exit this screen without saving your changes.