ZyXEL Communications Dimension ES-3148, User Manual, Page: 203 / 282

Dimension ES-3148 User’s Guide
Chapter 31 Introducing the Commands 201
Figure 109 CLI Help: List of Commands: Example 2
31.5.2 Detailed Command Information
Enter
<command> help
to display detailed sub command and parameters.
Enter
<command> ?
to display detailed help information about the sub commands and
parameters.
Figure 110 CLI Help: Detailed Command Information: Example 1
Figure 111 CLI: Help: Detailed Command Information: Example 2
31.6 Command Modes
There are three CLI command modes: User, Enable and Configure.
When you first log into the CLI, the initial command mode is the User mode. The User mode
commands are a subset of the Enable mode commands. The User mode command prompt ends
with an angle bracket (>).
ras> ?
enable Turn on privileged commands
exit Exit from the EXEC
help Description of the interactive help system
history Show a list of previously run commands
logout Exit from the EXEC
ping Exec ping
show Show system information
ssh SSH client
traceroute Exec traceroute
ras>
ras> ping help
Commands available:
ping <ip|host-name>
<
[ in-band|out-of-band|vlan <vlan-id> ]
[ size <0-1472> ]
[ -t ]
>
ras>
ras> ping ?
<ip|host-name> destination ip address
help Description of ping help
ras>