ZyXEL Communications Dimension ES-2008, User Manual

Page: 68 / 168

Dimension ES-2008 Ethernet Switch
9-4 VLAN
Table 9-2 VLAN Setup: Port-based Configuration
FIELD DESCRIPTION
Group Name Enter a descriptive name to identify the VLAN.
VLAN ID Enter a VLAN identification number. The number must be between 1 and
4094.
Add Select a port number from the left selection list and click Add to add the
port to the VLAN.
Remove Select a port number from the right selection list and click Remove to
remove the port from the VLAN.
Ports in the same VLAN must be in the same trunk group.
9.5 Tag-Based VLAN Configuration
Follow the steps below to configure VLANs on the switch.
Step 1. In the Switch Configuration screen, select either 802.1Q with GVRP or
802.1Q without GVRP from the VLAN Operation Mode drop-down list
box. Then click Apply .
Step 2. Click Administrator and then VLAN Configuration to display the basic
VLAN screen as shown next.
Figure 9-4 VLAN Setup – 802.1Q with/without GVRP VLAN Information