ZyXEL Communications Broadband Security Gateway P-312, User Manual, Page: 54 / 254

P312 Broadband Security Gateway
3-8 Internet Access
RIP Direction
Press the space bar to select the RIP direction from None, Both/In
Only/Out Only.
None
Version Press the space bar to select the RIP version from RIP-1/RIP-
2B/RIP-2M.
RIP-1
Incoming
Protocol Filters Enter the filter set(s) you wish to apply to the incoming traffic
between this node and the Prestige.
Outgoing
Protocol Filters Enter the filter set(s) you wish to apply to the outgoing traffic
between this node and the Prestige.
When you have completed this menu, press [Enter] at the prompt [Press ENTER to Confirm…] to save
your configuration, or press [Esc] at any time to cancel.
3.3 Internet Access Setup
You will see three different Menu 4 screens depending on whether you chose
Ethernet, PPTP
or
PPPoE
Encapsulation .
3.3.1 Ethernet Encapsulation
You must choose the Ethernet option when the WAN port is used as a regular Ethernet. The PPPoE choice
is for a dial-up connection using PPPoE. If you choose
Ethernet
in Menu 4 you will see the next screen.
Figure 3-6 Menu 4 – Internet Access Setup (Ethernet)
Menu 4 - Internet Access Setup
ISP's Name= ChangeMe
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Login Server IP= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= Full Feature
Press ENTER to Confirm or ESC to Cancel: