ZyXEL Communications ATP200 User Manual Download Page 634

Page: 634 / 852

Chapter 34 Object

ZyWALL ATP Series User’s Guide

634

34.8.2.1 The One-Time Schedule Add/Edit Screen

The

One-Time Schedule Add/Edit

screen allows you to define a one-time schedule or edit an existing

one. To access this screen, go to the

Schedule

screen (see

Section 34.8.2 on page 633

), and click either

the

Add

icon or an

Edit

icon in the

One Time

section.

Figure 414

Configuration > Object > Schedule > Edit (One Time)

Remove

To remove an entry, select it and click

Remove

. The Zyxel Device confirms you want to remove

it before doing so.

References

Select an entry and click

References

to open a screen that shows which settings use the entry.

This field is a sequential value, and it is not associated with a specific schedule.

Name

This field displays the name of the schedule, which is used to refer to the schedule.

Start Day /

Time

This field displays the date and time at which the schedule begins.

Stop Day /

Time

This field displays the date and time at which the schedule ends.

Reference

This displays the number of times an object reference is used in a profile.

Recurring

Add

Click this to create a new entry.

Edit

Double-click an entry or select it and click

Edit

to be able to modify the entry’s settings.

Remove

To remove an entry, select it and click

Remove

. The Zyxel Device confirms you want to remove

it before doing so.

References

Select an entry and click

References

to open a screen that shows which settings use the entry.

This field is a sequential value, and it is not associated with a specific schedule.

Name

This field displays the name of the schedule, which is used to refer to the schedule.

Start Time

This field displays the time at which the schedule begins.

Stop Time

This field displays the time at which the schedule ends.

Reference

This displays the number of times an object reference is used in a profile.

Table 269 Configuration > Object > Schedule (continued)

LABEL

DESCRIPTION

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ATP200

Reviews:

ZyXEL Communications ATP200, User Manual, Page: 634 / 852

Search results

Summary of Contents for ATP200

Reviews: