ZyXEL Communications ATP200 User Manual Download Page 614

Page: 614 / 852

Chapter 34 Object

ZyWALL ATP Series User’s Guide

614

34.4.3 Add/Edit MON Profile

This screen allows you to create a new monitor mode profile or edit an existing one. To access this
screen, click the

Add

button or select and existing monitor mode profile and click the

Edit

button.

Figure 398

Configuration > Object > MON Profile > Add/Edit MON Profile

The following table describes the labels in this screen.

Profile Name

This field indicates the name assigned to the monitor profile.

Apply

Click

Apply

to save your changes back to the Zyxel Device.

Reset

Click

Reset

to return the screen to its last-saved settings.

Table 253 Configuration > Object > MON Profile (continued)

LABEL

DESCRIPTION

Table 254 Configuration > Object > MON Profile > Add/Edit MON Profile

LABEL

DESCRIPTION

Activate

Select this to activate this monitor mode profile.

Profile Name

This field indicates the name assigned to the monitor mode profile.

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands

ZyXEL Communications ATP200, User Manual

Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands