Chapter 20 IPSec VPN
ZyWALL ATP Series User’s Guide
386
20.2.1 The VPN Connection Add/Edit Screen
The
VPN Connection Add/Edit Gateway
screen allows you to create a new VPN connection policy or
edit an existing one. To access this screen, go to the
Configuration > VPN Connection
screen (see
), and click either the
Add
icon or an
Edit
icon.
References
Select an entry and click
References
to open a screen that shows which settings use the entry.
See
for an example.
#
This field is a sequential value, and it is not associated with a specific connection.
Status
The activate (light bulb) icon is lit when the entry is active and dimmed when the entry is
inactive.
The connect icon is lit when the interface is connected and dimmed when it is disconnected.
Name
This field displays the name of the IPSec SA.
VPN Gateway
This field displays the VPN gateway in use for this VPN connection.
Gateway IP
Version
This field displays what IP version the associated VPN gateway(s) is using. An IPv4 gateway may
use an IKEv1 or IKEv2 SA. An IPv6 gateway may use IKEv2 only.
Policy
This field displays the local policy and the remote policy, respectively.
Apply
Click
Apply
to save your changes back to the Zyxel Device.
Reset
Click
Reset
to return the screen to its last-saved settings.
Table 155 Configuration > VPN > IPSec VPN > VPN Connection (continued)
LABEL
DESCRIPTION