ZyXEL Communications ATP200 User Manual Download Page 269

Page: 269 / 852

Chapter 9 Interfaces

ZyWALL ATP Series User’s Guide

269

9.8 Bridge Interfaces

This section introduces bridges and bridge interfaces and then explains the screens for bridge interfaces.

Enable Proxy ARP Select this to allow the Zyxel Device to answer external interface ARP requests on behalf of

a device on its internal interface. Interfaces supported are:

• Ethernet
• VLAN
• Bridge

See

Section 9.3.2 on page 228

for more information.

Add

Click

Add

to create an

IPv4 Address

, an

IPv4 CIDR

(for example, 192.168.1.1/24) or an

IPv4

Range

(for example, 192.168.1.2-192.168.1.100) as the target IP address. The Zyxel Device

answers external ARP requests only if they match one of these inputted target IP addresses.
For example, if the

IPv4 Address

is 192.168.1.5, then the Zyxel Device will answer ARP

requests coming from the WAN only if it contains 192.168.1.5 as the target IP address.

Select an existing entry and click

Remove

to delete that entry.

Related Setting

Configure WAN

TRUNK

Click

WAN TRUNK

to go to a screen where you can set this VLAN to be part of a WAN trunk

for load balancing.

Configure Policy

Route

Click

Policy Route

to go to the screen where you can manually configure a policy route to

associate traffic with this VLAN.

Click

to save your changes back to the Zyxel Device.

Cancel

Click

Cancel

to exit this screen without saving.

Table 105 Configuration > Network > Interface > VLAN > Add / Edit (continued)

LABEL

DESCRIPTION

Summary of Contents for ATP200





















































































































































































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands

ZyXEL Communications ATP200, User Manual

Search results

Summary of Contents for ATP200

Reviews:

Related manuals for ATP200

Brands by name

Popular brands