ZyXEL Communications ARMOR G1, User Manual

Page: 41 / 183

Chapter 6 Bridge Mode
NBG6818 User’s Guide
41
6.4 Bridge Mode Status Screen
Click Settings > System > Status to open the status screen.
Figure 19 Settings > System > Status (Bridge Mode)
The following table describes the labels shown in the Status screen.
Table 6 Settings > System > Status (Bridge Mode)
LABEL DESCRIPTION
System
Model Name This is the model name of your device.
Firmware Version This is the firmware version.
System Operation Mode This is the device mode to which the NBG6818 is set, see Section 13.7 on page 137
for more information.
Enable IPv4 Firewall This shows if the IPv4 firewall is enabled on the NBG6818.
Enable IPv6 Simple Security This shows if the IPv6 firewall is enabled on the NB6818.
System Uptime This is the total time the NBG6818 has been on.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP Server This shows the LAN port’s DHCP role - Enable or Disable .
IPv6 Address This shows the current IPv6 address of the NBG6818 in the LAN.