manualshive.com logo in svg

ZyXEL Communications AMROM Z2, User Manual

Share
Download
ZyXEL Communications AMROM Z2 User Manual Download Page 123

 Chapter 13 Applications

NBG6817 User’s Guide

123

13.2.2  Notification Screen

Use this screen to have the NBG6817 send e-mail notifications when the user(s) is connected to the 
NBG6817 for Internet access during the specified time periods.

In 

Expert

 mode, click 

Applications

 > 

Parental Control > Notification

 to open the following 

screen. 

Figure 82   

Expert Mode > Applications > Parental Control > Notification 

The following table describes the fields in this screen. 

Port

Enter the port of the service. 

If you have chosen a pre-defined service in the 

Service Name

 field, this field will not be 

configurable.

Apply

Click 

Apply

 to save your settings with the NBG6817.

Back

Click 

Back

 to return to the previous screen.

Table 42   

Expert Mode > Applications > Parental Control > General: Add/Edit new rules: Add new 

service (continued)

LABEL

DESCRIPTION

Table 43   

Expert Mode > Applications > Parental Control > Notification 

LABEL

DESCRIPTION

General

E-mail 
Notification

Select 

Enable

 to activate e-mail notifications.

Add new rules

Click this if you want to configure a new parental monitor rule.

Notification Rules

#

This shows the index number of the rule.

Summary of Contents for AMROM Z2


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands