manualshive.com logo in svg

ZyXEL Communications AMROM Z2, User Manual

Share
Download
ZyXEL Communications AMROM Z2 User Manual Download Page 104

Chapter 11 Wireless LAN

NBG6817 User’s Guide

104

Figure 68   

Expert Mode > Wireless > Guest Wireless

The following table describes the labels in this screen.

11.4.1  Guest Wireless Edit

Use this screen to edit an SSID profile. Click the 

Edit

 icon next to an SSID in the 

Guest Wireless

 

screen. The following screen displays.

Table 31   

Expert Mode > Wireless > Guest Wireless

LABEL

DESCRIPTION

Band

Use 

2.4GHz

 or 

5GHz

 to set up the NBG6817’s guest Wi-Fi network.

#

This is the index number of each SSID profile. 

Status

This shows whether the SSID profile is active (a yellow bulb) or not (a gray bulb).

SSID

An SSID profile is the set of parameters relating to one of the NBG6817’s BSSs. The SSID 
(Service Set IDentifier) identifies the Service Set with which a wireless device is associated. 

This field displays the name of the wireless profile on the network. When a wireless client 
scans for an AP to associate with, this is the name that is broadcast and seen in the 
wireless client utility.

Security

This field indicates the security mode of the SSID profile.

Remaining time

If the user is currently not permitted to access the Internet, you can click 

Set

 to allow 

access for a specified period of time. A screen then displays allowing you to set how long 
(in hours) the user is allowed to access the Internet.

This field displays the amount of Internet access time that remains for each user before the 
NBG6817 blocks the user from accessing the Internet.

0:0:0

 means there is no extra Internet access time. 

Edit

Click the 

Edit 

icon to configure the SSID profile.

Summary of Contents for AMROM Z2


















































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands