Chapter 4 Tutorials
AMG1302-T11C User’s Guide
45
Tutorial: NAT Port Forwarding Setup
4.6.1 Port Forwarding
Thomas needs to configure the port settings and IP address on the AMG1302-T11C. Traffic should
be forwarded to port 666 of the Doom server computer which has an IP address of 192.168.1.34.
Thomas may set up the port settings by configuring the port settings for the Doom server computer
(see
for more information).
1
Activate NAT in the
Network Setting > NAT > General
screen. Click
Apply
.
2
Click
Network Setting > NAT > Port Forwarding
. Select
PVC0
as the WAN interface and click
Add new rule
.
3
Configure the screen with the following values:
The screen should look as follows. Click
Apply
.
D
=192.168.1.34
WAN
LAN
port 666
A
Service Name
Select
User Define
.
Start/End Ports
Enter
666
as the
Start
and
End
port.
Server IP Address
Enter the IP address of the Doom server (
192.168.1.34
for this example).
