Chapter 15 Firewall
AMG1302-T11C User’s Guide
171
Figure 85
Security > Firewall > Rules > Add
The following table describes the labels in this screen.
Table 64
Security > Firewall > Rules > Add
LABEL
DESCRIPTION
Active
Select this option to enable this firewall rule.
Action for Matched
Packets
Use the drop-down list box to select whether to discard (
Drop
), deny
and send an
ICMP destination-unreachable message to the sender of (
Reject
) or allow the
passage of (
Permit
) packets that match this rule.
IP Version Type
Select the IP version,
IPv4
or
IPv6
, to apply this firewall rule to.
Rate Limit
Set a maximum number of packets per second, minute, or hour to limit the
throughput of traffic that matches this rule.
Maximum Burst
Number
Set the maximum number of packets that can be sent at the peak rate.
Log
This field determines if a log for packets that match the rule is created or not.
Rules/Destination Address
