ZyXEL Communications AMG1302-T10A User Manual Download Page 87

Page: 87 / 332

Chapter 7 LAN Setup

AMG1302-T10A User’s Guide

Enter an IP address into the

IP Address

field. The IP address must be in dotted decimal notation.

This will become the IP address of your Device.

Enter the IP subnet mask into the

IP Subnet Mask

field. Unless instructed otherwise it is best to

leave this alone, the configurator will automatically compute a subnet mask based upon the IP

address you entered.

Click

Apply

to save your settings.

Figure 38

Network > LAN > IP

The following table describes the fields in this screen.

7.2.1 The Advanced LAN IP Setup Screen

Use this screen to edit your Device's RIP, multicast and Windows Networking settings. Click the

Advanced Setup

button in the

LAN IP

screen. The screen appears as shown.

Figure 39

Network > LAN > IP: Advanced Setup

Table 22

Network > LAN > IP

LABEL

DESCRIPTION

IP Address

Enter the LAN IP address you want to assign to your Device in dotted decimal

notation, for example, 192.168.1.1 (factory default).

IP Subnet Mask

Type the subnet mask of your network in dotted decimal notation, for example

255.255.255.0 (factory default). Your Device automatically computes the subnet mask

based on the IP Address you enter, so do not change this field unless you are

instructed to do so.

Apply

Click this to save your changes.

Cancel

Click this to restore your previously saved settings.

Advanced Setup

Click this to display the

Advanced LAN Setup

screen and edit more details of your

LAN setup.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands