ZyXEL Communications AMG1302-T10A User Manual Download Page 258

Page: 258 / 332

Appendix B IP Addresses and Subnetting

AMG1302-T10A User’s Guide

258

Once you have decided on the network number, pick an IP address for your Device that is easy to

remember (for instance, 192.168.1.1) but make sure that no other device on your network is using

that IP address.

The subnet mask specifies the network number portion of an IP address. Your Device will compute

the subnet mask automatically based on the IP address that you entered. You don't need to change

the subnet mask computed by the Device unless you are instructed to do otherwise.

Private IP Addresses

Every machine on the Internet must have a unique address. If your networks are isolated from the

Internet (running only between two branch offices, for example) you can assign any IP addresses to

the hosts without problems. However, the Internet Assigned Numbers Authority (IANA) has

reserved the following three blocks of IP addresses specifically for private networks:

• 10.0.0.0 — 10.255.255.255
• 172.16.0.0 — 172.31.255.255
• 192.168.0.0 — 192.168.255.255

You can obtain your IP address from the IANA, from an ISP, or it can be assigned from a private

network. If you belong to a small organization and your Internet access is through an ISP, the ISP

can provide you with the Internet addresses for your local networks. On the other hand, if you are

part of a much larger organization, you should consult your network administrator for the

appropriate IP addresses.

Regardless of your particular situation, do not create an arbitrary IP address; always follow the

guidelines above. For more information on address assignment, please refer to RFC 1597,

Address

Allocation for Private Internets

and RFC 1466,

Guidelines for Management of IP Address Space.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands