ZyXEL Communications AMG1302-T10A User Manual Download Page 225

Page: 225 / 332

Chapter 23 Diagnostic

AMG1302-T10A User’s Guide

225

The following table describes the fields in this screen.

Table 99

Maintenance > Diagnostic > DSL Line

LABEL

DESCRIPTION

ATM Status

Click this to view your DSL connection’s Asynchronous Transfer Mode (ATM)

statistics. ATM is a networking technology that provides high-speed data transfer.

ATM uses fixed-size packets of information called cells. With ATM, a high QoS

(Quality of Service) can be guaranteed.

The (Segmentation and Reassembly) SAR driver translates packets into ATM cells.

It also receives ATM cells and reassembles them into packets.

These counters are set back to zero whenever the device starts up.

inPkts

is the number of good ATM cells that have been received.

inDiscards

is the number of received ATM cells that were rejected.

outPkts

is the number of ATM cells that have been sent.

outDiscards

is the number of ATM cells sent that were rejected.

inF4Pkts

is the number of ATM Operations, Administration, and Management

(OAM) F4 cells that have been received. See ITU recommendation I.610 for more

on OAM for ATM.

outF4Pkts

is the number of ATM OAM F4 cells that have been sent.

inF5Pkts

is the number of ATM OAM F5 cells that have been received.

outF5Pkts

is the number of ATM OAM F5 cells that have been sent.

openChan

is the number of times that the Device has opened a logical DSL

channel.

closeChan

is the number of times that the Device has closed a logical DSL

channel.

txRate

is the number of bytes transmitted per second.

rxRate

is the number of bytes received per second.

ATM Loopback

Test

Click this to start the ATM loopback test. Make sure you have configured at least

one PVC with proper VPIs/VCIs before you begin this test. The Device sends an

OAM F5 packet to the DSLAM/ATM switch and then returns it (loops it back) to the

Device. The ATM loopback test is useful for troubleshooting problems with the

DSLAM and ATM network.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands