ZyXEL Communications AMG1302-T10A User Manual Download Page 182

Page: 182 / 332

Chapter 17 Remote Management

AMG1302-T10A User’s Guide

182

Click

Advanced > Remote MGMT

Telnet

tab to display the screen as shown.

Figure 102

Advanced > Remote MGMT > Telnet

The following table describes the labels in this screen.

17.4 The FTP Screen

You can use FTP (File Transfer Protocol) to upload and download the Device’s firmware and

configuration files. Please see the User’s Guide chapter on firmware and configuration file

maintenance

for details. To use this feature, your computer must have an FTP client.

Use this screen to specify which interfaces allow FTP access and from which IP address the access

can come. To change your Device’s FTP settings, click

Advanced > Remote MGMT

FTP

. The

screen appears as shown.

Figure 103

Advanced > Remote MGMT > FTP

Table 70

Advanced > Remote Management > Telnet

LABEL

DESCRIPTION

Server Port

You may change the server port number for a service if needed, however you must use

the same port number in order to use that service for remote management.

Server Access

Select the interface(s) through which a computer may access the Device using this

service.

Secured Client IP

Address

A secured client is a “trusted” computer that is allowed to communicate with the Device

using this service.

Select

All

to allow any computer to access the Device using this service.

Choose

Selected

to just allow the computer with the IP address that you specify to

access the Device using this service.

Apply

Click this to save your changes.

Reset

Click this to restore your previously saved settings.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands