ZyXEL Communications AMG1302-T10A User Manual Download Page 138

Page: 138 / 332

Chapter 9 Network Address Translation (NAT)

AMG1302-T10A User’s Guide

138

9.6.4 NAT Application

The following figure illustrates a possible NAT application, where three inside LANs (logical LANs

using IP alias) behind the Device can communicate with three distinct WAN networks.

Figure 75

NAT Application With IP Alias

9.6.5 NAT Mapping Types

NAT supports five types of IP/port mapping. They are:

•

One to One

: In One-to-One mode, the Device maps one local IP address to one global IP

address.

•

Many to One

: In Many-to-One mode, the Device maps multiple local IP addresses to one global

IP address. This is equivalent to SUA (for instance, PAT, port address translation), ZyXEL’s Single

User Account feature that previous ZyXEL routers supported (the

SUA Only

option in today’s

routers).

•

Many to Many Overload

: In Many-to-Many Overload mode, the Device maps the multiple local

IP addresses to shared global IP addresses.

•

Many-to-Many No Overload

: In Many-to-Many No Overload mode, the Device maps each local

IP address to a unique global IP address.

•

Server

: This type allows you to specify inside servers of different services behind the NAT to be

accessible to the outside world.

Port numbers do not change for

One-to-One

and

Many-to-Many No Overload

NAT mapping

types.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands