ZyXEL Communications AMG1302-T10A User Manual Download Page 109

Page: 109 / 332

Chapter 8 Wireless LAN

AMG1302-T10A User’s Guide

109

Click

Network > Wireless LAN > WPS

. The following screen displays.

Figure 55

Network > Wireless LAN > WPS

The following table describes the labels in this screen.

8.5 The WPS Station Screen

Use this screen to set up a WPS wireless network using either Push Button Configuration (PBC) or

PIN Configuration.

Table 37

Network > Wireless LAN > WPS

LABEL

DESCRIPTION

WPS Setup
Enable WPS

Select the check box to activate WPS on the Device.

PIN Number

This shows the PIN (Personal Identification Number) of the Device. Enter this PIN in the

configuration utility of the device you want to connect to using WPS.

The PIN is not necessary when you use WPS push-button method.

Generate

Click this to have the Device create a new PIN.

WPS Status

This displays

Configured

when the Device has connected to a wireless network using

WPS or

Enable WPS

is selected and wireless or wireless security settings have been

changed. The current wireless and wireless security settings also appear in the screen.

This displays

Unconfigured

if WPS is disabled and there is no wireless or wireless

security changes on the Device or you click

Release

to remove the configured wireless

and wireless security settings.

Release

This button is available when the WPS status is

Configured.

Click this button to remove all configured wireless and wireless security settings for WPS

connections on the Device.

Apply

Click this to save your changes.

Refresh

Click this to restore your previously saved settings.

Summary of Contents for AMG1302-T10A













































































































































































































































































































































Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands

ZyXEL Communications AMG1302-T10A, User Manual

Search results

Summary of Contents for AMG1302-T10A

Reviews:

Related manuals for AMG1302-T10A

Brands by name

Popular brands